xvpic is not responding

You can either use the bug tracker or describe the anomaly here.

xvpic is not responding

Postby OZ1BV » 01, 2010 Mar Mon 9:47 am

Hi

My setup:
- Windows 7
- AN589 programmer
- Std. LPT port
- PIC18F4685

vxpic is able to initialize the programmer (Says Interface tested, OK.).
I am able to toggle pins (tried with the "Pull MCLR low") and it works.
When I want the start programming the PIC, vxpic freezes and is not responding at all.

I know that my programmer is working since I am able to program the PIC with IC-prog (it does not support PIC18F4685 but a small test program could be loaded into the PIC when selecting another PIC18F family PIC).

Any ideeas about how to solve this problem?

Regards, Brian
OZ1BV
 
Posts: 1
Joined: 01, 2010 Mar Mon 9:33 am

Re: xvpic is not responding

Postby admin » 01, 2010 Mar Mon 7:29 pm

Hi Brian,

I have not tested WxPic with the 18F series because I have no device and no programmer for that. So I have no idea of what the problem can be. Though to help understand the issue I suggest that you set the "Generate Verbose Messages" option (bottom left of Option Tab) and copy here the messages that are displayed in the Messages Tab once WxPic has stopped working.
The traces may help to understand. Though I cannot be sure that this will be sufficient.

Philippe
admin
Site Admin
 
Posts: 153
Joined: 12, 2009 Jul Sun 7:20 pm


Return to WxPic bug reporting

Who is online

Users browsing this forum: No registered users and 1 guest

cron